伟大工程修改
奇迹是一种特殊的决议,比较常见的是修建运河,通过变更目标环境替换成可通行的河流。
创造一个奇迹需要修改多个不同的文件才能达成。注意,本文将以运河为例描述如何创造一个“奇迹”。
奇迹工程 #
奇迹可以在Europa Universalis IV/common/great_projects/*.txt中找到。 格式如下:
<project> = {
# Province the project starts in
start = <province id>
# Date built in real life (If you start the game at a date later than this, then the project will show up)
date = year.month.date
# How much it costs to build
build_cost = <ducats>
# If the project can be moved
can_be_moved = yes/no
# Starting tier of the project
starting_tier = <tier>
# Project type
type = canal/monument
# Conditions to build the project
build_trigger = {
<conditions>
}
# What happens when the project is built
on_built = {
<do stuff> # For example; add_prestige = 25
# For canal, do add_canal = <canal_name>
}
# What happens when the project is destroyed
on_destroyed = {
<do stuff> # For example; add_prestige = -25
# For canal, do remove_canal = <canal_name>
}
# Conditions to use project
can_use_modifiers_trigger = {
<conditions>
}
# Conditions to upgrade project
can_upgrade_trigger = {
<conditions>
}
# Conditions for if the project will be destroyed when conquered
keep_trigger = {
<conditions>
}
# Tiers
tier_<tier> = {
# Time it takes to upgrade the project
upgrade_time = {
months = <months>
}
# Cost to upgrade the project
cost_to_upgrade = {
factor = <ducats>
}
# What modifiers are given to the province the project is located in
province_modifiers = {
<modifiers>
}
# What modifiers are given to the area of the province the project is located in
area_modifier = {
<modifiers>
}
# What modifiers are given to the nation that owns the monument
country_modifiers = {
<modifiers>
}
# What happens when the upgrade is complete
on_upgraded = {
<do stuff> #For example; add_prestige = 25
}
}
}
注意: 原版游戏中有4个等级,包括被摧毁/未建成等级,如下所示:tier_0, tier_1, tier_2, tier_3
Great Project Image #
You will need to create an image in
Europa
Universalis
IV/gfx/interface/great_projects/great_project_
spriteTypes = { # If editing an existing .gfx file then this line will likely already be there, so you might not need to write this. However, make sure the following are inside this.
spriteType = {
name = "GFX_great_project_<project_name>"
texturefile = "gfx//interface//great_projects//great_project_<project_name>.dds"
}
}
连接海域 #
运河类奇迹需要在 adjacencies.csv 中定义一个特殊的链接关系。
<id>;<id>;canal;<id>;-1;-1;-1;-1;comment
前两个
地图 #
当运河工程完成后,运河所在省份会形成一条新的河流。正是通过这条特殊的瓦片河流图块链接到你的运河。
创建瓦片河流,你必须将图片裁剪成128(即128*128,256*256等)分辨率。从 rivers.bmp 中拷贝所需要的截面,以达成图层颜色统一的目标。
瓦片中新增需要的河流(运河), 规则与一般新建河流规则相同。
将文件名保存为
重点: 注意,在你实际操作之前,请务必留意原图 rivers.bmp 中瓦片图块的左上与左下的坐标。
在 default.map 中, 你需要自定义一条新的运河:
canal_definition = {
name = "<project_name>" # 奇迹名称
x = <x> # X轴坐标对应瓦片图块的左上角坐标(其实也是左下角的x坐标)
y = <y> # 地图高度 减去 你的瓦片的左下角的y-坐标
}
这里的y-坐标不是直观可见的,你在像Photoshop这样的程序中得到的y坐标,需要从地图高度(原版地图是2048像素)中减去它才能获得定义的正确值。(这个操作是把Photoshop的第四象限坐标,转换成普通的第一象限坐标。)
例如,如果你的瓦片的左下角y坐标是 1407,你应该用 2048 - 1407 得到 641,那才是你需要写进定义的值。
奇迹决议 #
为了使玩家或者AI可以建造奇迹,我们一般需要设置两个决议:一个用于启动建造;一个用于取消建造。
决议模板:
country_decisions = {
construct_<project> = {
major = yes
potential = {
is_random_new_world = no
OR = {
ai = no
AND = {
treasury = 60000
owns_or_vassal_of = <province id>
}
}
has_discovered = <province id>
<province id> = {
range = ROOT
NOT = { has_great_project = <project> }
NOT = { has_construction = canal }
}
}
allow = {
owns_or_vassal_of = <province id>
is_subject = no
treasury = 30000
}
effect = {
add_treasury = -30000
<province id> = {
add_great_project = {type =<project> instant = yes/no}
}
}
ai_will_do = {
factor = 1
}
}
cancel_<project> = {
major = yes
potential = {
ai = no
owns_or_vassal_of = <province id>
is_subject = no
<province id> = {
has_construction = canal
}
}
allow = {
<province id> = {
has_construction = canal
}
}
effect = {
<province id> = {
cancel_construction = yes
}
}
ai_will_do = {
factor = 0
}
}
}
本地化 #
当然,奇迹建造若需要正常显示也少不了在本地化中添加相应条目:
<project>_title: "Name"
<project>: "Name"
great_project_<project>: "Name"
参考资料 #
三条运河的关键字:
kiel_canalsuez_canalpanama_canal
